DIRECTIONAL DRILLING | MICROTUNNELLING | AUGER BORING
- MICROTUNNELLING -
When precision is required and there is no room for error, URBA have a number of custom built, laser guided Microtunnelling Machines. These machines are capable of boring from 500mm – 2400mm in diameter.
URBA’s machines are able to bore in a variety of ground conditions, utilising ‘vacuum extraction’ of spoil. URBA have a custom built cleaning system which enables for the cleaning of drilling fluid during the boring process. Once in the Vacuum tank, any excess water is drained, cleaned and re-used using our mud cleaning system which is based at the top of the bore pit. All dirt remains within the Vacuum tank and is removed to a designated site. The Vacuum Tank and Generator are mounted on our Tri – Axle trailer and Prime Mover. The generator and vacuum unit are in a silenced canopy, mounted on the trailer.
This makes the entire boring process much cleaner and environmentally friendly.
- COMPLETED PROJECTS -
- MICROTUNNELLING -
100m of 500mm Microtunnelling for Gravity sewer in shale.
- MICROTUNNELLING -
3 x 1200mm Microtunnelling bores 50m in length for Storm water
- J SERIES JACKING PIPE -
24m of 1200mm Jacking Pipe Installed For See Civil Pacific Hwy Upgrade. Bore Was Within 8mm Of Line & Grade
- MICROTUNNELLING -
48m of 500mm Steel Case Installed For Coffs Harbour Council, new Gravity Sewer Main.
- J SERIES JACKING PIPE -
5 Cell 800 J Series Jacking Pipe Installed For See Civil at Maclean, Pacific Hwy Upgrade.
- J SERIES JACKING PIPE -
3 x 800 J Series Jacking pipe Installed For Golding Contractors At Mororo. Each Bore Was 40m In length & Within 10mm On Line & Grade
- PIPE JACKING -
Toowoomba Regional Council 48m Of 1650RCP Pipe Jacking Under QR For TRC Stormwater.
- MICROTUNNELLING -
150m of 700mm Rising Main Tamworth Regional Council.
- MICROTUNNELLING -
1800RCP - 64m Toowoomba Regional Council
- DICL Pipe Jacked In & Grout Filled -
4 x 900mm Case Bores. 150m In Total.
